Links to additional Router Tables:
Horizontal | Precision | Bench Top | Table Top & Fence | Router Table Extension | Cast-Iron Table Extension
|
|
||||||
 |
|||||||
|
|||||||
|
|
|
|||||
Weighing in at 120 lbs, this is a big one! IMPROVED! "Rock Solid" Cast Iron and Steel Table
ROCK SOLID Heavyweight Router Table Item #9460..............SALE! $349.95 
Rated:
 |
 |
||||||
for a Video Demo of that featureall customer reviews and ratingsAverage Customer Rating: By Matthew DeRosby (Hampden ME US) Web site: A+ By Bob Bacon (Plymouth MA US) I have used the older version for a couple of years. The most demanding thing I've done with it is make raised panel doors and drawers for 3 kitchens. It's been a terrific help, but it's not perfect: 1. It's next to impossible to keep both sides of the split fence parallel to the table top. I installed a 4 foot one-piece maple fence, which works well for most jobs. 2. As others have said, the dust collection not very good. On mine, I can plug the dust collector and the router into the switch box on the table leg, so one switch turns them both on. Good feature. 3. Mounting and centering the router is tedious. See the manual. There are four clamps that hold the router base to the table and it's hard to get them all positioned so that the router shaft is centered. 4. The most frustrating thing was that none of my 3 routers (Dewalt, Mikita, and Rigid) had a long enough shaft to reach the table. I ended up buying a router bit extension collet, which solved the problem. Apparently the new package comes with an extension, so that may no longer be an issue. I would prefer not to have to use an extension when I'm using a big raised panel bit, though. Although the cuts are accurate, the vibration is a bit unnerving. 5.Mine doesn't have the gas filed lifting spring or the handles, so raising the bed to change bits and adjust the height of the router is not realistic. The bit extension I bought requires an allen wrench to change bits. With a little patience and a contortion, I can do it from the top of the table. 6. Adjusting the height of the router is awkward. I have the table against a wall and can't leave it pulled out while I use it, so I reach under the table and around the router from the front. 7. I use the hold-down system for raised panels but prefer a coping sled for the stile and rail end cuts. 8. Finally, I would change a couple of minor things like replacing the switch with a paddle switch and adding some adjustment screws so the height and alignment of the sliding table could be fine-tuned. By Eric Kolda (Yankton SD US) I have been woodworking since I was 12, now 38. I did a lot of research before purchasing this table. When I got the table it only took me about 1.5 hours to assemble including mounting the router. I cant say enough about this table, its solid, flat and worth more than what you pay. I would advise anyone looking for a router table to purchase this one you wont be disappointed. By DUANE KOLDA (YANKTON SD US) I HAVE BEEN WOODWORKING AS A HOBBY FOR 30 YRS AND HAVE USED MANY DIFFENT ROUTER TABLES THROUGHOUT THAT TIME. RECENTLY MY SON BOUGHT THE HEAVYWEIGHT FROM MLCS, I USED IT LAST WEEKEND. THIS IS THE BEST TABLE I HAVE EVER USED AND I HAVE USED MANY INCLUDING THOSE COSTING MUCH MORE AND RATED TO BE THE LATEST AND GREATEST BY PRESS. I HAVE ALWAYS SAID THAT THE ROUTER SHOULD BE PART OF THE TABLE NOT PART OF A PLATE THAT IS PART OF THE TABLE (JUST ANOTHER PLACE TO VIBRATE) I HOPE TO PLACE A ORDER FOR ONE OF THESE AS SOON AS I SELL THE ONE I HAVE NOW. THANK YOU FOR A GREAT MACHINE. By Roger Winters (Lynch Station VA US) This is a great table, especially like the tilt capability. Changing bits is easy once you remove the tables outter and inner rings around the bit. I look through the dust exhaust port (after removing the vacuum hose) and can see the bit clearly and can adjust the height of the bit from under the tilted table while watching the exact positioning of the bit against the object or measuring device. One draw back is the table top scratches easily and cedar wood dust will stain it if not cleaned immediately. By Camee :o) (Green Bay Wi US) Great table!!! A bit confusing when it came to mounting the router. The instructions kinda suck in general but for this part they were totally useless-for me. Other than that it truly is a great table for a great price. By Richard Shrader (Scottsboro Al US) I recently purchased the "Heavyweight" router table. They are not kidding when they tell you the weight. Suggest you get a friend to help with the lifting. Once assembled, the actual mounting of the router is somewhat challenging. This is the most difficult part of the whole assembly. I am using a Porter Cable fixed base router. It worked, but took a little persuading and a couple of off-color words. Once this is accomplished, the rest is easy. I suggest opting for the roller hold-downs. The fence could use a mechanism to offset the outfeed from the infeed for non-piloted cuts. However, this is the same on most of the available tables out there. A shim works just fine. The good part is the table is absolutely stable. No shake or vibration even when the router starts/stops. The dust collection chute works well and the table is absolutely FLAT. Assembly of the entire thing took about 2.5 hours. I did not need the extension with the Porter Cable router, but if doubt, it is a handy thing to have. I also suggest a mobile base. I used one from Woodcraft, but any heavy duty base will work. Overall, about a 4 out of possible 5. The only reason for the 4 is the instructions for mounting the router could be a little more clear, especially for new woodworkers. If you're a fan of the rock solid and foolproof table as I am, I would recommend it with confidence. |